Laser Cut Card Wallet pattern

This is digital products templates

• PDF (8.5″ x 11″) – Leather Card Wallet (Letter Size – Print)

 

Leather Selection

In this video we used Valdibrana Conceria, Tarano Italian Vachetta Leather – 3.5oz (~1.5mm) thick. This pattern is designed for a leather in that thickness range. Slightly thicker or slightly thinner will probably work but it is optimized for 1.5mm. If you are laser cutting I HIGHLY suggest sticking with a pure vegetable tanned leather.

Instructions / Project Notes

Cutting Panel

I cut a small panel of leather with a little bit of margin on all sides.

Masking the grain surface

This step isnt necessary but masking the cutting surface with a low-tack masking tape helps keep the surface clean during laser processing. This wide mask is the best Ive found so far, link above if you want to check it out.

 

Final Edge Finishing

Final step is to sand, bevel, dye, and burnish the body edges. I used a dremel with a sanding bit to remove all of the laser soot and glue spillover. HIGHLY SUGGEST putting on a mask for this step since it will be kicking up all that nasty stuff into the air around you. After sanding the edge should be nice and clean and you can finish as you normally would from there.

For full details please make an order it will be provide through Email in PDF formate.

 

Tee Trove Refund Policy

At Tee Trove, we value your satisfaction and aim to provide the best experience with our products. Please review our refund policy below:

Digital Products

Since our products are digital downloads, they are non-refundable. Once a file has been downloaded, we cannot process a refund due to the nature of the product.

However, if you encounter any issues with your purchase, such as:

• Download problems
• Missing files
• Errors in the template

Please contact us at [Your Support Email]. We’ll be happy to assist or provide a replacement file if necessary.

Order Cancellations

If your order is incomplete or has not been downloaded, you may request a cancellation and full refund within 24 hours of purchase.

How to Request Support

For any concerns or assistance, reach out to us at [Your Support Email]. Include your order number and details about the issue so we can resolve it quickly.

Your satisfaction matters to us, and we’re here to help. Thank you for choosing Tee Trove!